2 Stroke 18HP Outboard Motor, Long Shaft Outboard Motor Boat Engine, 246CC Heavy Duty Fishing Boat Marine Engine with CDI Ignition System Water Cooling System -Long Shaft

SpecificationMaterial: Aluminum AlloyColor: BlackModel: 18HP Horsepower Long AxisDisplacement: 246CCGear Ratio: 2.08 (27:13)Number of Cylinders: 2Speed: 4500-5500RPMGear: F-N-RRefueling Method: 92 Unleaded Gasoline is RecommendedOil Tank Capacity: 24L/6.34galLoad-bearing Capacity: 500-1000kg/1102-2204lbsIgnition System: CDICooling System: Water CoolingControl System: Tiller ControlStart System: Manual StartPropeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter)Suitable Stern Plate Height: 45cm-55cm/17.7*21.7inCylinder Diameter * Stroke: 56mm/2.2in*50mm/2inRecommended Engine Oil: 2 Stroke Engine OilMixing Ratio: Fuel: Oil = 50:1Trim and Tilt System: Manual TiltNet Weight: 28kg/61.7lbsGross Weight: 30kg/66.1lbsPackage Size: 133*71*38.5cm/52.4*28*15.2inProduct Size: 87.3*33.2*105.3cm/34.4*13.1*41.5inPackage Included1x Outboard Motor1x Flameout Rope1x Oil Pipe1x Sealing Ring1x Paper Pad1x Spark Plug1x Start Rope1x Water Pump Impeller1x Cotter Pin1x Fuel Tank1x English ManualOther ToolsNotes1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.3. After the running-in period, the volume ratio of gasoline and oil is 50:1.4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.5. The outboard motor must be started in water, do not start the engine on shore.

• 【2-stroke 18HP Outboard Engine】2-stroke 18HP long-shaft outboard engine (4500 to 5500 rpm) provides you with strong power to drive fast and save a lot of time and energy. 6.34 gallons of large-capacity fuel tank provides you with long endurance capacity to meet the needs of short/long distance travel. Many cooling holes and water cooling systems provide excellent heat dissipation capacity to prevent the engine from burning out after a long time of use.
• 【High Quality Material】2-stroke 18-horsepower long-shaft outboard engine is made of solid aluminum alloy. The manual start function allows you to easily operate by pulling the start rope and opening the speed switch on the handle. Its long anti-slip handle (20 inches long) is easy to grasp. The red stop button allows you to press for a few seconds to stop the engine.
• 【Flexible Steering】The outboard engine has forward gear, neutral gear and reverse gear as well as 360 degree steering function, which allows you to flexibly control the direction of the ship. Continuously variable speed and constant speed cruise function enable you to easily adjust the driving speed and stable constant speed navigation, bringing you a more comfortable user experience.
• 【Application】This outboard motor is applicable to small ships of different materials (less than 4.9 feet in width and 19.7 inches in length), such as inflatable boats, iron boats, plastic boats, fiberglass boats and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc. The maximum load of outboard engine is 2204 pounds to meet different requirements (the heavier the load, the slower the speed).
• 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours.
• ✅ We can provide CE certificate and certificate of origin.